Configuring Member-Level Data In A Junos Cluster - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Configuring Global Cluster Data with Configuration Groups (JUNOS Clusters Only)

Configuring Member-Level Data in a JUNOS Cluster

Copyright © 2010, Juniper Networks, Inc.
In the Cluster Info tab, click Templates, and then click the Edit icon. The Edit
3.
templates dialog box appears.
Select the templates you want to apply to the cluster, and then click OK.
4.
The selected templates appear in the main display area. Arrange them in order of
5.
preference using the up and down arrows.
For more information about templates, see "Using Device Templates" on page 196.
You can apply configuration groups to a JUNOS cluster object just as you can to a
standalone JUNOS device. See "Using Configuration Groups" on page 221.
You can cluster J Series routers or SRX Series gateways. You cannot cluster EX Series
devices, M Series devices, or MX Series devices.
You can include configuration groups within templates when configuring cluster objects.
Exactly the same rules apply as when configuring a standalone device. See "Using
Configuration Groups with Templates" on page 228 for details.
To provide configuration data for a specific cluster member, such as the node name,
NSM implements a special form of the wildcard mechanism to designate a configuration
group to a specific cluster member. For ease of management, we recommend placing
all your member-specific configuration data in one configuration group for each member.
You can apply multiple configuration groups to each member.
NOTE: Imported configurations already have the member-specific configuration groups
created and applied. Use the procedure described here only for modeled configurations.
We recommend using node0 and node1 as the names of the configuration groups that
correspond to member 0 and member 1 of the cluster, although you can use any name
containing the strings "node0" and "node1". We recommend you do not use node0 or
node1 as the names of configuration groups that contain cluster-level data.
To configure member-level data in a J Series cluster, follow these steps:
In the Device Manager, select Devices.
1.
From the list of devices, select the cluster whose member you want to configure,
2.
and then click the Edit icon.
In the Configuration tab, select Config Groups.
3.
Click the Add icon and select Config Group for HA Node (node0|node1 etc) from
4.
the list.
Configure the group as desired and click OK.
5.
A configuration group called "node" appears in the Config Group List.
Chapter 5: Configuring Devices
233