Pppoe Service-Name-Table - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

pppoe service-name-table

pppoe service-name-table tableName
Syntax
no pppoe service-name-table
Command introduced before JUNOSe Release 7.1.0.
Release Information
From Interface Configuration or Subinterface Configuration mode, assigns a PPPoE
Description
service name table to a PPPoE major interface for use by a static ATM or Ethernet
interface. The no version removes the PPPoE service name table assignment.
From Profile Configuration mode, assigns a PPPoE service name table to a profile
for use by the dynamic PPPoE interface column associated with the profile. The no
version removes the PPPoE service name table assignment.
Options
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
tableName Name of the PPPoE service name table; string of up to 31
alphanumeric characters
Chapter 4: P Commands
pppoe service-name-table
253