Configuring Multiclass Multilink Ppp; Multiclass Mlppp Overview; Multiclass Mlppp Fragmentation And Reassembly - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual

CHAPTER 10

Configuring Multiclass Multilink PPP

Multiclass MLPPP Overview

Multiclass MLPPP Fragmentation and Reassembly

Copyright © 2010, Juniper Networks, Inc.
Multiclass MLPPP Overview on page 345
Multiclass MLPPP Traffic Classes Overview on page 346
Multiclass MLPPP LCP Extensions Overview on page 347
Multiclass MLPPP Platform Considerations on page 347
Multiclass MLPPP References on page 348
Configuring Multiclass MLPPP on page 348
Enabling Multiclass MLPPP on page 349
Configuring Traffic Classes on Multiclass MLPPP Interfaces on page 350
Configuring Fragmentation on Multiclass MLPPP Interfaces on page 350
Configuring Reassembly on Multiclass MLPPP Interfaces on page 351
Example: Configuring Multiclass MLPPP on a Dynamic Interface on page 352
Example: Configuring Multiclass MLPPP on a Static Interface on page 353
Monitoring Multiclass MLPPP on page 353
Multiclass MLPPP enables the fragmentation of data packets of different priorities into
multiple classes in an MLPPP bundle. It enables you to interleave data packets of higher
priority between packets of lower priority before transmission.
When the MLPPP bundle consists of more than one multilink interface, multiclass MLPPP
ensures the delivery of high-priority, delay-sensitive traffic, such as voice and video, in
the proper sequence. Multiclass MLPPP accomplishes this by creating separate transmit
and receive contexts for every multilink class in the MLPPP bundle. The transmit and
receive contexts contain the sequence numbers and all other statistics pertaining to the
multilink class
You can configure fragmentation and reassembly on a multiclass MLPPP interface.
Fragmentation is the process by which a large packet is broken up into multiple smaller
fragments for simultaneous transmission across multiple links of an MLPPP bundle.
Reassembly is the process by which the destination router reassembles the fragments
into the original packets.
345