Baseline Path Interface Sonet - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline path interface sonet

Syntax
Release Information
Description
Options
Mode
258
baseline path interface sonet interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for SONET/SDH statistics at the path layer. The router
implements the baseline by reading and storing the MIB statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.