Username With Atm Circuit Identifier And No Circuit Type; Username With Vlan Circuit Identifier And Circuit Type - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Username with ATM Circuit Identifier and No Circuit Type

Username with VLAN Circuit Identifier and Circuit Type

Copyright © 2010, Juniper Networks, Inc.
host1(config-profile)#exit
host1(config)#
A route map that references the interface profile and the atlServiceProfile service
profile.
host1(config)#route-map atlRouteMap
host1(config-route-map)#set interface-profile atlInterfaceProfile
host1(config-route-map)#set ip service-profile atlServiceProfile
host1(config-route-map)#exit
host1(config)#
Each example shows the configuration of a service profile that enables RADIUS
authentication.
This example shows the steps to configure a service profile for a username that includes
the ATM circuit identifier, but does not include the circuit type.
host1(config)#ip service-profile atlServiceProfile
host1(config-service-profile)#user-prefix xyzcorp.atl
host1(config-service-profile)#domain eastcoast
host1(config-service-profile)#include hostname
host1(config-service-profile)#include circuit-identifier atm
host1(config-service-profile)#exit
host1(config)#
The example generates the following username:
The circuit identifier indicates a user at slot 2, port 3, with a virtual path identifier (VPI)
of 32 and a virtual channel identifier (VCP) of 100.
This example shows the steps to configure a service profile for a username that includes
a VLAN circuit identifier and the circuit type.
host1(config)#ip service-profile atlServiceProfile
host1(config-service-profile)#user-prefix xyzcorp.atl
host1(config-service-profile)#domain eastcoast
host1(config-service-profile)#include hostname
host1(config-service-profile)#include circuit-identifier vlan prepend-circuit-type
host1(config-service-profile)#exit
The example generates the following username:
Chapter 23: Configuring Subscriber Management
589