No Area - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

no area

no area { areaId | areaIdInt }
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Removes the specified OSPF area if there are no OSPF interfaces configured in the
Description
area. This command has only a no version.
Options
Router Configuration
Mode
areaId OSPF area ID in IP address format
areaIdInt OSPF area ID as a decimal value in the range 0–4294967295
Chapter 2: N Commands
81
no area