Baseline Mpls Next-Hop - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

baseline mpls next-hop

baseline mpls next-hop nextHopIndex
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for the specified MPLS next hop. Statistics for a next hop
Description
must be enabled with the mpls statistics next-hop command before they can be
baselined. By default, the next-hop counters are baselined at zero. There is no no
version.
Options
Privileged Exec
Mode
258
baseline mpls next-hop
nextHopIndex Number identifying a next hop; displayed by the show mpls
forwarding command