Baseline Mpls Next-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline mpls next-hop

Syntax
Release Information
Description
Options
Mode
256
baseline mpls next-hop nextHopIndex
Command introduced in JunosE Release 7.1.0.
Sets a statistics baseline for the specified MPLS next hop. Statistics for a next hop must
be enabled with the mpls statistics next-hop command before they can be baselined.
By default, the next-hop counters are baselined at zero. There is no no version.
nextHopIndex—Number identifying a next hop; displayed by the show mpls forwarding
command
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.