JunosE 11.3.x Command Reference Guide A to M
isis lsp-interval
Syntax
Release Information
Description
Options
Mode
1124
isis lsp-interval milliseconds
no isis lsp-interval
Command introduced before JunosE Release 7.1.0.
Configures the time delay between successive IS-IS link-state packet transmissions. The
no version restores the default value, 33 milliseconds.
milliseconds—Number of milliseconds in the range 1–4294967295; an interval between
successive link-state packets
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.