Hello-Timer - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

hello-timer

hello-timer milliseconds;
Syntax
Hierarchy Level [edit interfaces interface-name mlfr-uni-nni-bundle-options]
Statement introduced before JUNOS Release 7.4.
Release Information
For link services and voice services interfaces only, configure the rate at which hello
Description
messages are sent. A hello message is transmitted after a period defined in
milliseconds has elapsed.
Options milliseconds
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
—The rate at which hello messages are sent.
Range: 1 through 180 milliseconds
Default: 10 milliseconds
JUNOS Services Interfaces Configuration Guide
acknowledge-timer on page 953
address on page 962
Chapter 62: Summary of Interface Configuration Statements
1147
hello-timer