Isis Csnp-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

isis csnp-interval

Syntax
Release Information
Description
Options
Mode
1120
isis csnp-interval seconds [ level-1 | level-2 ]
no isis csnp-interval [ seconds ] [ level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the IS-IS CSNP interval for the specified interface. The no version restores
the default value.
seconds—Number in the range 0–65535; the interval of time in seconds between the
transmission of CSNPs on multiaccess networks for the designated router; default
value is 10 seconds, except for WAN interfaces, where the default value is 0
level-1—Sets the interval of time between transmission of CSNPs for level 1
independently
level-2—Sets the interval of time between transmission of CSNPs for level 2
independently
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.