Isis Csnp-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
isis csnp-interval
Syntax
Release Information
Description
Options
Mode
1118
isis csnp-interval seconds [ level-1 | level-2 ]
no isis csnp-interval [ seconds ] [ level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the IS-IS CSNP interval for the specified interface. The no version restores
the default value.
seconds—Number in the range 0–65535; the interval of time in seconds between the
transmission of CSNPs on multiaccess networks for the designated router; default
value is 10 seconds, except for WAN interfaces, where the default value is 0
level-1—Sets the interval of time between transmission of CSNPs for level 1
independently
level-2—Sets the interval of time between transmission of CSNPs for level 2
independently
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers