112
C
1: P
HAPTER
UBLIC
interface atm
Syntax
View
Parameter
Description
Example
reset atm interface
Syntax
View
Parameter
Description
Example
ATM
DSL I
C
AND
NTERFACE
OMMANDS
interface atm interface-number
System view
interface-number: ATM or DSL interface number or DSL interface view.
Use the
interface atm
# Enter ATM 2/0 interface view.
<Sysname> system-view
[Sysname] interface atm 2/0
[Sysname-Atm2/0]
reset atm interface [ atm interface-number ]
User view
atm interface-number: Specifies an ATM interface.
Use the
reset atm interface
created on an ATM interface or all the ATM interfaces.
Note that:
If you execute this command with an ATM interface specified, this command
■
displays the statistics on the PVCs created on the ATM interface.
If you execute this command with no ATM interface specified, the statistics on
■
the PVCs created on all the ATM interfaces are cleared.
To clear statistics about ATM interfaces, use the reset counters interface
command, which is described in Ethernet Interface Commands in the Access
Volume.
# Clear the statistics on all the PVCs created on ATM 2/0 interface.
<Sysname> reset atm interface atm 2/0
command to enter ATM interface view.
command to clear the statistics on the PVCs