Differential-Delay; Display Interface Ima-Group - H3C MSR 20-20 Command Reference Manual

Example

differential-delay

Syntax
View
Parameter
Description
Example

display interface ima-group

Syntax
View
Parameter
Description
By default, the line coding format of an ATM E1 interface is HDB3, and that of an
ATM T1 interface is B8ZS.
# Set the line coding format to AMI for ATM 5/0 interface.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] code ami
differential-delay milliseconds
undo differential-delay
IMA group interface view
milliseconds: Maximum differential delay, in the range 25 to 100 milliseconds.
Use the
differential-delay
the member links in the IMA group.
Use the undo differential-delay
milliseconds.
# Set the maximum differential delay for the member links in IMA group 1 to 25
milliseconds.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] ima ima-group 1
[Sysname-Atm5/0] interface ima-group 5/1
[Sysname-Ima-group5/1] differential-delay 25
display interface ima-group [ group-interfacenumber ]
Any view
group-interfacenumber: IMA group interface number.
Use the
display interface ima-group
and status information about an IMA group interface or all the IMA group
interfaces.
If you specify the group-interfacenumber argument, this command displays the
configuration and status information about the IMA group interface identified by
the argument. Otherwise, this command displays the configuration and status
information about all the IMA group interfaces.
command to set the maximum differential delay for
command to restore the default, that is, 25
command to display the configuration
115