Ima-E1/T1 Interface Configuration Commands; Cable; Clock - H3C MSR 20-20 Command Reference Manual

2

cable

Syntax
View
Parameter
Description
Related command:
Example

clock

Syntax
View
Parameter
IMA-E1/T1 I
C
ONFIGURATION
cable { long | short }
undo cable
ATM E1/T1 interface view
long: Long haul mode, with a cable length in the range 151 to 500 m (495 to
1640 ft.).
short: Short haul mode, with a cable length in the range 0 to 150 m (0 to 495 ft.).
Use the command to set the cable length of the ATM E1 interface.
cable
Use the command to restore the default.
undo cable
By default, long haul mode applies, allowing of cable length mode adaptation. In
this case, the long haul mode is adopted first. If the cable is of short haul mode,
the system switches to the short haul mode automatically.
To have the system use the short haul mode, use the cable short command.
frame-format.
# Set the cable length of ATM E1 interface 5/0 to long haul.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] cable long
clock { master | slave }
undo clock
ATM E1/T1 interface view
master: Sets the clock mode as master.
NTERFACE
C
OMMANDS