Snmp-Agent Packet Max-Size; Snmp-Agent Sys-Info - H3C MSR 20-20 Command Reference Manual

Related command:
Example

snmp-agent packet max-size

Syntax
View
Parameter
Description
Example

snmp-agent sys-info

Syntax
View
Parameter
You can use the display snmp-agent mib-view command to view the access
right of the default view. Also, you can use the undo snmp-agent mib-view
command to remove the default view, after that, however, you cannot read or
write all MIB nodes on Agent.
snmp-agent group.
# Create a MIB view mibtest, which includes all objects of the subtree mib2.
<Sysname> system-view
[Sysname] snmp-agent mib-view included mibtest 1.3.6.1
snmp-agent packet max-size byte-count
undo snmp-agent packet max-size
System view
byte-count: Maximum number of bytes of an SNMP packet that can be received or
sent by an agent, in the range 484 to 17,940. The default value is 1,500 bytes.
Use the
snmp-agent packet max-size
number of bytes in an SNMP packet that can be received or sent by an agent.
Use the undo snmp-agent packet max-size
packet size.
# Configure the maximum number of bytes that can be received or sent by an
SNMP agent to 1,042 bytes.
<Sysname> system-view
[Sysname] snmp-agent packet max-size 1042
snmp-agent sys-info { contact sys-contact | location sys-location | version { all | { v1
| v2c | v3 }* } }
undo snmp-agent sys-info { contact | location | version { all | { v1 | v2c | v3 }* } }
System view
sys-contact: A string of 1 to 200 characters that describes the contact information
for system maintenance.
sys-location: A string of 1 to 200 characters that describes the location of the
device.
command to configure the maximum
command to restore the default
2341