H3C MSR 20-20 Command Reference Manual page 2349

Msr 20/30/50 series routers

Hide thumbs Also See for MSR 20-20:

Table of Contents

For SNMPv1 and SNMPv2c, this command means adding of a new SNMP group.

For SNMPv3, this command adds a new user to an SNMP group.

Related command:

snmp-agent group, snmp-agent community, snmp-agent local-switch

# Add a user John to the SNMP group Johngroup. Configure the security model to

be authentication, the authentication protocol to be HMAC-MD5-96, and the

authentication password to be hello.

<Sysname> system-view

[Sysname] snmp-agent group v3 Johngroup

[Sysname] snmp-agent usm-user v3 John Johngroup authentication-mode md5 hello

Chapters

Table of Contents

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all