Display Snmp-Agent Trap-List - H3C MSR 20-20 Command Reference Manual

2334 C 154: SNMP C
HAPTER
Description
Example

display snmp-agent trap-list

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
Use the display snmp-agent sys-info
system information.
If no keyword is specified, all SNMP agent system information will be displayed.
# Display the current SNMP agent system information.
<Sysname> display snmp-agent sys-info
The contact person for this managed node:
Hangzhou H3C Technology Co., Ltd.
The physical location of this node:
Hangzhou China
SNMP version running in the system:
SNMPv3
display snmp-agent trap-list
Any view
None
Use the display snmp-agent trap-list
can send the Trap messages and whether their Trap sending is enabled or not. If a
module comprises of multiple sub-modules, then as long as one sub-module has
the sending of Trap messages enabled, the whole module will be displayed as
being enabled with the Trap sending.
snmp-agent trap enable.
# Display the modules that can send the Trap messages and whether their Trap
sending is enabled or not.
<Sysname> display snmp-agent trap-list
bgp trap enable
configuration trap enable
flash trap enable
fr trap enable
isdn trap enable
mpls trap enable
ospf trap enable
standard trap enable
system trap enable
voice trap enable
vrrp trap enable
Enable traps: 11; Disable traps: 0
command to display the current SNMP
command to display the modules that