Display Snmp-Agent Group - H3C MSR 20-20 Command Reference Manual

2330 C 154: SNMP C
HAPTER

display snmp-agent group

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Community name: bb
Group name: bb
Storage-type: nonVolatile
Table 614 Descriptions on the fields of display snmp-agent community
Field
Community name
Group name
Acl
Storage-type
display snmp-agent group [ group-name ]
Any view
group-name: Specifies the SNMP group name, a string of 1 to 32 characters, case
sensitive.
Use the display snmp-agent group
SNMP agent group, including group name, security model, MIB view, storage type,
and so on. Absence of the group-name parameter indicates that information for
all groups will be displayed.
# Display the information of all SNMP agent groups.
<Sysname> display snmp-agent group
Group name: aa
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview:<no specified>
Storage-type: nonVolatile
Table 615 Descriptions on the fields of the display snmp-agent group command
Field Description
Group name SNMP group name
Security model Security model of the SNMP group, which can be: authPriv (authentication
with privacy), authNoPriv (authentication without privacy), or
noAuthNoPriv (no authentication no privacy).
Readview The read only MIB view associated with the SNMP group
Writeview The writable MIB view associated with the SNMP group
Description
Community name
SNMP group name
The number of the ACL in use
Storage type, which could be:
volatile: Information will be lost if the system is rebooted
■
nonVolatile: Information will not be lost if the system is rebooted
■
permanent: Modification permitted, but deletion forbidden
■
readOnly: Read only, that is, no modification, no deletion
■
other: Other storage types
■
command to display information for the