Snmp-Agent Trap Enable - H3C MSR 20-20 Command Reference Manual

2344 C 154: SNMP C
HAPTER

snmp-agent trap enable

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
snmp-agent trap enable [ bgp | configuration | flash | fr | isdn | mpls | ospf
[ process-id ] [ ospf-trap-list ] | standard [ authentication | coldstart | linkdown |
linkup | warmstart ]* | system | voice | vrrp [ authfailure | newmaster ] ]
undo snmp-agent trap enable [ bgp | configuration | flash | fr | mpls | ospf
[ process-id ] [ ospf-trap-list ] | standard [ authentication | coldstart | linkdown |
linkup | warmstart ]* | system | voice | vrrp [ authfailure | newmaster ] ]
System view
bgp: Enables the sending of BGP Trap packets.
configuration: Enables the sending of configuration Trap packets.
flash: Enables the sending of FLASH Trap packets.
fr: Enables the sending of Trap packets in the event of Frame Relay virtual link
change.
isdn: Enables the sending of ISDN Trap packets.
mpls: Enables the sending of LSP Trap packets.
ospf [ process-id ] [ ospf-trap-list ]: Enables the sending of OSPF Trap packets. The
parameter process-id is the process ID and spf-trap-list is the Trap packet list.
standard: Enables the sending of standard Trap packets.
authentication: Enables the sending of authentication failure Trap packets in
■
the event of authentication failure.
coldstart: Sends coldstart Trap packets when the device restarts.
■
linkdown: Sends linkdown Trap packets when the port is in a linkdown status.
■
It should be configured globally.
linkup: Sends linkup Trap packets when the port is in a linkup status. It should
■
be configured globally.
warmstart: Sends warmstart Trap packets when the SNMP restarts.
system: Sends H3C-SYS-MAN-MIB (a private MIB) Trap packets.
voice: Enables the sending of voice Trap packets.
vrrp [ authfailure | newmaster ]: Sends VRRP Trap packets.
authfailure: Sends authentication failure VRRP Trap packets.
■
newmaster: Enables the sending of VRRP newmaster Trap packets when the
■
device becomes the Master.