Snmp-Agent Target-Host - H3C MSR 20-20 Command Reference Manual

2342 C 154: SNMP C
HAPTER
Description
Related command:
Example

snmp-agent target-host

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
version: The SNMP version in use.
all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
■
v1: SNMPv1.
■
v2c: SNMPv2c.
■
v3: SNMPv3.
■
Use the snmp-agent sys-info
including the contact information, the location, and the SNMP version in use.
Use the
undo snmp-agent sys-info contact
snmp-agent sys-info location command to restore the default.
Use the undo snmp-agent sys-info version
SNMP function of the specified version.
By default, the location information is Hangzhou China, version is SNMPv3, and
the contact is Hangzhou H3C Technology Co., Ltd.
display snmp-agent sys-info.
n
Network maintenance switch fabricers can use the system contact information to
get in touch with the manufacturer in case of network failures. The system
location information is a management variable under the system branch as
defined in RFC1213-MIB, it identifies the location of the managed object.
# Configure the contact information as "Dial System Operator at beeper #
27345".
<Sysname> system-view
[Sysname] snmp-agent sys-info contact Dial System Operator at beeper # 27345
snmp-agent target-host trap address udp-domain { ip- address | ipv6 ipv6-
address } [ udp-port port-number ] [ vpn-instance vpn-instance-name ] params
securityname security-string [ v1 | v2c | v3 [ authentication | privacy ] ]
undo snmp-agent target-host { ip- address | ipv6 ipv6- address } securityname
security-string [ vpn-instance vpn-instance-name ]
System view
trap: Specifies the host to be the Trap host.
address: Specifies the IP address of the target host for the SNMP messages.
udp-domain: Indicates that the Trap message is transmitted using UDP.
ip-address: The IPv4 address of the Trap host.
command to configure system information,
command and the undo
command to disable use of the