Place A Test Call - Avaya CMC1 Installation, Upgrades And Additions

Completing Installation and Cable Pinouts
15. In the Alarm Destination field, choose
16. Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress
messages to indicate the current status.
!
If the preceding steps have been completed successfully, ART displays the
DEFINITY Upgrade Registration Report.
17. Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234,
selecting prompt, 2, prompt 6, then prompt 2) immediately for assistance.
18. Save the DEFINITY Upgrade Registration Report in a file for future
reference or print the report and keep the copy.

Place a Test Call

1. From any telephone connected to a digital line circuit pack, call any nearby
telephone connected to an analog line circuit pack.
2. Verify that the dial tone, ringing pattern, and talk path are acceptable.
3. Place a call through the Central Office (outside call) to any nearby
telephone. Verify that the dial tone, ringing pattern, and talk path are
acceptable.
2-6
Issue 5 October 2002
DON'T CHANGE to leave the product's currently-administered
alarm origination number unchanged (the common choice for
upgrades).
SET NUMBER TO and type the complete alarm destination
telephone number, including any dialing prefix (for example, "9" or
"*9"). The default value in this field is the TSO-Denver number
(18005353573).
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or
Home buttons while ART displays these progress messages.
If you have to abort your registration, click on the Abort Session
button that appears with one of the progress messages.
555-233-118