Connecting And Logging In To The Remote Supervisor Adapter - Avaya S8500 Manual

Configuring the Remote Supervisor Adapter
Connecting and logging in to the Remote
Supervisor Adapter
Use the following steps to connect and log in to the RSA:
1
Connect the services laptop to the Ethernet port on the RSA using a crossover cable.
2
Open a browser.
3
In the Address
The system displays the Enter Network Password window.
Log on as craft, using password passw0rd (with a zero).The system displays the Welcome
window.
4
From the
before disconnecting.
5
Click Continue.
62
NOTE:
At the completion of some of the following steps you will be prompted to restart ASM. Do
not restart ASM at this time. You will be reminded to restart the ASM once all the
configuration steps are completed.
field, type 192.11.13.6 and press Enter.
Inactive session time value
NOTE:
If the session times out unexpectedly, click Start New Session and Refresh.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
field, click no timeout, which allows 60 minutes of use
December 2003