Configuring A Session Log - Avaya G430 Manual

Configuring a session log

About this task
A session log is the display of system messages on the terminal screen. It is automatically
deleted when a session ends.
Procedure
1. Enter set logging session enable.
2. Optionally, define filters to limit the types of messages received (see
Related topics:
Example discontinuation of the display of system messages
Example display of session logging configuration
Session logging message format
Example discontinuation of the display of system messages
The following output is an example of the set logging session disable command used
to discontinue the display of system messages to the terminal screen.
Example
Gxxx-001
(super)# set logging session disable
Done!
Example display of session logging configuration
The following output is an example of the show logging session condition. command
that displays whether session logging is enabled or disabled, and lists all filters defined for
session logging.
Example
Gxxx-001
(super)# show logging session condition
Administering Avaya G430 Branch Gateway
Gxxx-001(super)# set logging session enable
Done!
Note:
If the device is connected to several terminals, a separate session log is
established for each terminal.
configuration on page 224).
on page 223
on page 224
System logging
Logging filter
on page 223
October 2013 223