Configuring WAN interfaces
Modem dial backup maintenance
The G250/G350 generates specific log messages for Dialer interface activity when configured
to do so. Certain dialer-related log messages are generated to aid you in troubleshooting
problems with modem dial backup. In addition, messages generated by the modem and the
PPP session are available to help with troubleshooting modem dial backup issues.
Activating session logging
To activate session logging for modem dial backup functions, type the following commands.
Logging messages will be sent to the terminal screen.
●
set logging session condition dialer information
set logging session condition console information
●
set logging session condition usb-modem information
●
●
set logging session condition ppp information
Note:
Not all logging messages indicate a trouble condition. Some are generated to
Note:
provide information on normal working activity of the Dialer interface. For more
information on logging configuration, see
page
Note:
Syslog and log file logging are also available. See
Note:
logging on page
Setting the severity level of the logging session
The set logging commands must include a severity level. All logging messages with the
specified severity and higher are displayed. The following are the available severity levels:
Information - This message is for informational purposes and requires no action on your
●
part.
Debug - This message provides information that can be useful in debugging certain
●
problems, but requires no action itself.
Warning - This message indicates a condition requiring user intervention and
●
troubleshooting.
246 Administration for the Avaya G250 and Avaya G350 Media Gateways
187.
187.
Chapter 7: Configuring logging on
Chapter 7: Configuring