16
Adding New Hardware to Avaya™ MCC1, SCC1, and G600 Media Gateways
Install and Administer IP Connectivity Hardware
TN2302AP IP Media Processor
The TN2302AP IP Media Processor provides on interface between a customer's IP network and
Avaya media gateways. This interface is used to transport voice and FAX between the media
gateways and IP devices such as H.323 V2 compliant endpoints and other Avaya telephone
systems. Each TN2302AP can support between 32 and 64 voice channels, depending on the
codecs used.
NOTE:
The P board suffix designation means the circuit pack is firmware-downloadable. Click
the Upgrading tab above and go to "Upgrade Selected Port Circuit Pack Firmware" for
more information.
The following sections describe the process:
''Check your shipment'' on page 16
•
•
''Install a TN2302AP IP Media Processor'' on page 17
•
''Install the cables'' on page 17
''Install the circuit packs'' on page 18
•
•
''Administer the IP Media Processor'' on page 19
''Test the external connection to the LAN'' on page 21
•
For further administration, refer to the Administration for Network Connectivity for Avaya™
Communication Manager.
Check your shipment
When the order arrives at your site, check the contents (see
Inspect the shipping carton for damage before opening it. If the box is damaged, do not
1
open it. Inform the shipping company, and ask for instructions on filing a claim.
2
If the box is undamaged, check the contents against the packing slip. Check the condition
of each component, and note any damage or shortages on the packing slip. The carton
should contain the items in
Media Processor ordered.
3
Read and follow any directions inserted into the package by the factory.
Required Hardware
Comcode/Code
108312612
''Required Hardware'' on page 16
Description
TN2302AP IP Media Processor (MedPro)
May 2003
''Required Hardware'' on page
for each TN2302AP IP
Quantity
1or more
16).