Ethernet module QoS commands
Example
AG# show qos module congestion-profile 1 2
show qos module ethernet
Use this command to display the interface-level Module QoS configuration.
Syntax
show qos module ethernet <slot/port>
Table 268: Variable definitions
<slot/port>
Example
AG# show qos module ethernet 6/12
show qos module policing-cos-map ip
Use this command to display the policy CoS mappings configured for the IP packets.
Syntax
show qos module policing-cos-map ip [<dscp-value> | <conformance-
level>]
Table 269: Variable definitions
<dscp-value>
<conformance-level>
250
Command Line Reference
Variable
Variable
Variable
Comments? infodev@avaya.com
Value
queues in the congestion profile will be
displayed.
Value
Slot/port of the interface
Value
Optional. The DSCP value in the IP packet.
Valid Range: 0-63 If dscp-value is specified,
all the policing-cos-mappings associated
with the DSCP value will be displayed.
Otherwise, displays all the mappings
Optional. The conformance-level assigned
by the policer to the packet. Valid Range:
August 2013