Run The Automatic Registration Tool (Art) For The Ras Ip Address; Obtaining The Ras Ip Address And Password - Avaya G350 Installing And Upgrading

Run the Automatic Registration Tool (ART)
for the RAS IP address
The ART tool is a software tool that generates a remote access (RAS) IP address and
password, for accessing a product attached to a customer's modem. This IP address is
required for configuring remote access to a modem on the S8300 or G350. If you need to
configure remote access to both the G350 and the S8300, follow this procedure twice,
once for the G350 and once for the S8300. For each procedure, a script file is created and
downloaded or emailed to you. You can use the installation script to automatically set up
an IP address and other alarming parameters.
When you run GIW, you will have the opportunity to import the EPW. The ART information
will be imported along with all the other information in the EPW. Alternatively, if the G350
will be configured using the CLI, keep the installation script to run as a CLI command at the
configuration stage.
If the G350 will be configured using Gateway Installation Wizard (GIW) or Avaya
Installation Wizard (AIW), and you have an Electronic Planning Worksheet (EPW), enter
the ART information contained in the installation script into the EPW.
Note:
ART is available only to Avaya associates. Business Partners call 800-295-0099.
Note:
Note:
You must generate a license and authentication file before you use the ART tool.
Note:
In addition, the ART process is available only to Avaya personnel. You need an
ART user name and password, which you can set up at the ART web site.
Non-Avaya personnel must contact their service support or customer care center
for INADS addresses, if required.

Obtaining the RAS IP address and password

1. Access the ART web site on your laptop at http://art.dr.avaya.com.
2. From the User menu, select Administer an S8x00, G350, CCS, CVLAN, or ASG
Guard II.
The Enter Network Password dialog box appears.
3. Enter your ART user name and password.
4. Click OK.
The Start of Installation script & IP Addr Admin screen appears.
5. In the FL Number field, enter the customer's FL number.
6. In the Session Type field, select Installation Script Administration.
Before going to site
Issue 4 February 2007 21