Table of Contents
Advertisement
Chapter 10
Policy Commands
show ip qos-list
User level: privileged, supervisor.
Command Mode: Root, Interface
Use show ip qos-list to display the attributes for a specific Quality of Service (QoS)
list or all QoS lists for the current interface.
Syntax:
The syntax for this command is:
Command Mode: Root
show ip qos-list {<list> | all | <interface>} [detailed]
Command Mode: Interface
show ip qos-list {<list> | all | {active-list-in | active-
list-out | active-list-in-out}} [detailed]
Syntax
<list>
all
<interface>
{active-list-in |
active-list-out |
active-list-in-out}
[detailed]
Example:
W310-1(super)# show ip qos-list
Index
-----
400
401
214
Description
QoS list(s) for the specified interface to display.
! This parameter is required in the Root command mode
only.
Displays all QoS lists.
Interface is not required for the Interface command mode.
Otherwise, specify the interface type.
Specify as follows:
•
active-list-in displays lists for the ingress direction
•
active-list-out displays lists for the egress direction
•
active-list-in-out displays lists for both the ingress and
egress directions
Displays detailed information
Name
-----------
Default QoS List
list #401
Owner
------------
other
other
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
