Show Crypto Ipsec Transform-Set - Avaya G450 Cli Reference Manual

Name
Transform
PFS &
Secs left &
KB left &
Mode &
Related Commands
clear crypto isakmp,
crypto ipsec transform-set,
crypto isakmp policy,
crypto-list

show crypto ipsec transform-set

Use the show crypto ipsec transform-set command to display the configuration for
the specified transform-set or all transform-sets.
Syntax
show crypto ipsec transform-set [transform-set-name]
Parameters
Parameter
transform-set-name
Description
Lists all the transforms being used by the SA. Each transform is listed
in a separate row.
Displays information about Perfect Forward Secrecy (PFS) usage,
when the SA is negotiated by IKE Phase-2. Possible values are:
No – PFS is not used
●
#<N> – PFS is used with Diffie-Hellman group N
●
The number of seconds left for this SA's expiration
The number of kilobytes left for this SA's expiration
The encapsulation mode:
* This parameter appears when the
#
This parameter appears when IP Payload Compression (IPPCP) is used.
&
The SA table is displayed only when active SAs exist for the rule.
clear crypto sa, clear crypto sa
show crypto isakmp
show crypto isakmp sa,
Description
The name of the transform set you wish to
display. If you do not enter a value, all
transform-sets are displayed.
or
tunnel transport
detail keyword is specified.
counters, crypto ipsec
peer, show crypto isakmp
show crypto map, show ip
transform-set,
peer-group, show
active-lists, show ip
Possible Default
Values Value
Issue 1 January 2008
VPN
show
1257