Chapter 12: VLAN commands
vlan database
Use this command to enter the VLAN configuration mode.
Syntax
vlan database
Example
AG/configure# vlan database
vlan
Use this command to create VLANs in the bridge global database and to remove VLANs from
the database.
Syntax
[no] vlan <vid> [name <WORD>]
Table 87: Variable definitions
Variable
[name <WORD>]
[no]
<vid>
Example
AG/configure/vlan# vlan 10
Command Line Reference
Value
The name that you assign to the VLAN. This
parameter is optional.
Removes a VLAN from the database.
The VLAN identification number that you
assign. Valid values are 2 to 4000.
August 2013
107