Set Transform-Set - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
continuous-channel,
(crypto map), show crypto map

set transform-set

A crypto map object points to a single transform-set object, which contains the parameters
required for IKE Phase 2 negotiation.
Use the set transform-set command to configure the transform-set. Use the no form of
the command to remove the transform-set from the crypto map.
Note:
You cannot remove a transform-set from a crypto map that is being used by an
Note:
active crypto-list. You must first de-activate the crypto-list, using the no form of
the ip crypto-group command. See
Syntax
[no] set transform-set name
Parameters
Parameter
name
User Level
read-write
Context
crypto map
Example
To configure transform-set ts1:
G450-001(config-crypto:10)# set transform-set ts1
Related Commands
continuous-channel,
peer-group, show crypto map
1240 Avaya G450 CLI Reference
crypto map, description (crypto
Description
The name of the transfer set
crypto map, description (crypto
map), set transform-set,
ip crypto-group on page 1241.
Possible Values
1-32 characters
map), set dscp, set peer (crypto
VPN
set dscp, set peer
Default
Value
map), set