Firmware Version Control - Avaya G430 Manual

You can restore a backup copy of the configuration from the FTP or TFTP server or the USB
flash drive. When you restore the backup copy of the configuration, the backup copy becomes
the new running configuration on the Branch Gateway.
Related topics:
Saving configuration changes and backing them up
Saving configuration changes and backing them up
Procedure
1. To save changes to the configuration of the Branch Gateway, enter copy
2. Back up either the running configuration or the startup configuration to an FTP,

Firmware version control

Firmware is the software that runs the Branch Gateway. The Branch Gateway has two firmware
banks:
• Bank A
• Bank B
Each firmware bank contains a version of the Branch Gateway firmware. These may be
different versions. The purpose of this feature is to provide redundancy of firmware. You can
save an old version of the firmware in case you need to use it later. This is particularly important
when uploading new versions.
Related topic
Software and firmware upgrades
Related topics:
Using an older firmware version
Administering Avaya G430 Branch Gateway
running-config startup-config
A copy of the running configuration becomes the new startup configuration.
TFTP or SCP server on your network, or to a USB flash drive.
For more information, see
on page 25
Configuration file backup and restore
on page 83
on page 26
Configuration overview
on page 98
October 2013 25