Check Spe; Verify Software Version; Verify System Status - Avaya CMC1 Installation, Upgrades And Additions

Task Table
change station xxxx
Extension: 1014
Type:10MET
Port:
Name:
STATION OPTIONS
Loss Group: 2
Data Module? n
Speakerphone: 2-way
Display Language? English
Screen 3-6. Station form

Check SPE

Type status system 1 and press

Verify Software Version

1. Type list configuration software-version and press
UPDATE FILE column, note whether a patch has been applied.

Verify System Status

1. Type display alarms and press
the needed corrective actions.
2. Type display errors and press
error 18s that identify the busy-outs placed by the customer.
Restore the customer-placed busy-outs after you have upgraded the
system.
3. Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
list announcements
555-233-118
STATION
Lock Messages? n
Security Code:
Coverage Path 1:
Coverage Path 2:
Enter
NOTE:
If the system must be restored to the old version, this patch must be
downloaded onto the system.
Personalized Ringing Pattern: 3
Message Lamp Ext: 1014
Mute button enabled? y
Media Complex Ext:
IP Softphone? y
Remote Office Station? n
IP Emergency calls:
to check the health of the system.
. If the system is not alarm-free, take
Enter
. Examine the error log and record the
Enter
Issue 5 October 2002
Page 1 of X
BCC:
TN:1
COR: 1
. Under the
Enter
3-13