Set Spantree Max-Age - Avaya G450 Cli Reference Manual

Parameters
Parameter
seconds
User Level
read-write
Context
general
Example
To specify spanning tree hello time is 2 seconds:
G450-001# set spantree hello-time 2
bridge hello time is set to 2.
Related Commands
set port spantree,
spantree priority,
forward-delay,
spantree version,

set spantree max-age

Use the set spantree max-age command to specify the time to keep an information
message before it is discarded.
Syntax
set spantree max-age seconds
Description
The value must not exceed
(Bridge Max Age / 2) - 1. The recommended
value is 2.
set port spantree cost,
set spantree default-path-cost,
set spantree max-age,
show spantree
set port spantree force-protocol-migration,
set spantree enable |
set spantree priority, set spantree
Spanning tree
Possible Default
Values Value
1-10
set port
disable, set spantree
tx-hold-count, set
Issue 1 January 2008 1107