Set Spantree Hello-Time - Avaya W310 Command Reference Manual

set spantree hello-time

User level: privileged, supervisor.
Use the set spantree hello-time command to set the bridge hello time parameter.
The bridge hello time is the time interval (in seconds) between generation of configuration
BPDUs by the root.
Syntax:
The syntax for this command is:
set spantree hello-time <seconds>
Syntax
<seconds>
Example:
W310-1# set spantree hello-time 2
bridge hello time set to 2.
Related Commands:
Use then
Avaya W310 Command Reference Guide
Description
The time interval (in seconds) between generation of
configuration BPDUs by the root. Value ranges between 1 to 10
and must not exceed (Bridge-Max-Age/2) – 1.
The recommended value is 2 sec.
command to display spanning-tree information.
show spantree
Chapter 14
339