Set Date And Time - Avaya CMC1 Installation Manual

Activate and Administer the System
The default daylight savings rule is 0, no daylight savings.
1. Type change daylight-savings-rules and press
Screen 1-3. Daylight Savings Rules screen
Rule
0: No Daylight Savings
1: Start: first Sunday___ on or after April___ 1
Stop:
2: Start: first
Stop:
3: Start: first _________ on or after ________ __ at __:__
Stop:
4: Start: first _________ on or after ________ __ at __:__
Stop:
5: Start: first _________ on or after ________ __ at __:__
Stop:
6: Start: first _________ on or after ________ __ at __:__
Stop:
7: Start: first _________ on or after ________ __ at __:__
Stop:
2. Type the appropriate start and stop information in the Change Day,
Month, Date, Time, and Increment (for example, 1:00 equals one hour)
fields for each rule.
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a
daylight savings rule if it is in use on either the Locations or Date and
Time screens.
3. Press

Set Date and Time

1. Enter set time and press
Screen 1-4. Date and Time screen
DATE
Day of the Week: Tuesday
Day of the Month: 8
TIME
Hour: 20
555-233-118
DAYLIGHT SAVINGS RULES
Change Day
first Sunday___ on or after October_ 25 at _3:00
___ on or after ________ __ at _____
first ___ on or after _______ __ at _____
first _________ on or after ________ __ at __:__
first _________ on or after ________ __ at __:__
first _________ on or after ________ __ at __:__
first _________ on or after ________ __ at __:__
first _________ on or after ________ __ at __:__
.
Enter
.
Enter
DATE AND TIME
Minute: 30 Second: XX
Daylight Savings Rule: 0
.
Enter
Month___Date Time____Increment
at _2:00
Month: February
Year: 2000
Type: standard
Issue 7 November 2003
01:00
1-59