Table of Contents
Advertisement
Chapter 14
Spanning Tree Commands
set spantree forward-delay
User level: privileged, supervisor.
Use the set spantree forward-delay command to set the bridge forward delay
time parameter. The forward delay time is the time a port takes to change to the forwarding
state.
Syntax:
The syntax for this command is:
set spantree forward-delay <seconds>
Syntax
<seconds>
Example:
W310-1# set spantree forward-delay 15
bridge forward delay set to 15.
Related Commands:
Use then
338
Description
The time that is used when transferring the port to forwarding
state. Value range is 4 to 30 seconds and must exceed (Bridge
Max Age/2). Recommended value is 15 seconds.
command to display spanning-tree information.
show spantree
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
