User Level
read-write
Context
crypto map
Example
To specify the crypto map description as "crypto map 1":
G450-001(config-crypto:10)# description "crypto map 1"
Related Commands
continuous-channel,
peer-group,
show crypto map
set dscp
Use the set dscp command to set the DSCP value in the tunneled packet. Use the no form of
this command to take the DSCP value from the original header (default setting).
Syntax
[no] set dscp dscp-value
Parameters
Parameter
dscp-value
User Level
read-write
Context
crypto map
crypto
map,
set
transform-set,
Description
The static DSCP value in the DS field of the
tunneled packet.
The default setting is no set dscp, which
specifies that the DSCP is copied from the
DS field of the original packet.
set
dscp,
set peer (crypto
Possible
Values
0-63
Issue 1 January 2008
VPN
map),
set
Default
Value
1237