Ip Ospf Router-Id - Avaya G450 Cli Reference Manual

Parameters
Parameter
priority
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To set the interface OSPF priority to 17:
G450-001(if:Vlan 1)# ip ospf priority 17
Related Commands
ip ospf authentication,
hello-interval, ip ospf
router ospf, show ip
show ip protocols

ip ospf router-id

Use the ip ospf router-id command to configure the IP address of the router interface.
Syntax
ip ospf router-id router_id
Parameters
Parameter
router_id
Description
The interface priority
ip ospf authentication-key,
message-digest-key,
ospf, show ip ospf database,
Description
The IP address of the router
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
show ip ospf interface,
Possible
Values
Possible Default
Values Value
0-255 1
dead-interval, ip ospf
ip ospf router-id,
show ip ospf neighbor,
Default Value
lowest existing
IP interface
Issue 1 January 2008
OSPF
623