Crypto Ipsec Transform-Set - Avaya G450 Cli Reference Manual

CLI Commands

crypto ipsec transform-set

Use the crypto ipsec transform-set command to enter the IKE phase 2 (IPSec)
transform-set context and create or edit IPSec parameters for the VPN tunnel. Use the no form
of the command to delete IKE phase 2 (IPSec) parameters for the VPN tunnel.
Syntax
[no] crypto ipsec transform-set name
{esp-des | esp-3des | esp-aes | esp-aes-192 | esp-aes-256 | esp-null} [{esp-md5-hmac |
esp-sha-hmac}] [comp-lzs]
Note:
If you want to enable authentication only, you must enter the esp-null
Note:
parameter.
Parameters
Parameter
name
esp-des
esp-3des
esp-aes
esp-aes-192
esp-aes-256
1208 Avaya G450 CLI Reference
Description
The transform-set name
Keyword specifying the following
encryption type: Encapsulation Security
Protocol and Data Encryption Standard
Keyword specifying the following
encryption type: Encapsulation Security
Protocol and Triple Data Encryption
Standard
Keyword specifying the following
encryption type: Encapsulation Security
Protocol and Advanced Encryption
Standard using a 128-bit key
Keyword specifying the following
encryption type: Encapsulation Security
Protocol and Advanced Encryption
Standard using a 192-bit key
Keyword specifying the following
encryption type: Encapsulation Security
Protocol and Advanced Encryption
Standard using a 256-bit key
Possible Values Default
Value
1-32 characters,
no spaces
VPN