Upgrading Software And Firmware Using Ftp/Tftp - Avaya G450 Manual

Administration
Hide thumbs Also See for G450:
Table of Contents

Advertisement

Basic device configuration

Upgrading software and firmware using FTP/TFTP

To upgrade software or firmware, you must obtain an upgrade file from Avaya. Place the file on
your FTP or TFTP server. Then, use one of the following commands to upload the file to the
G450. For each of these commands, include the full path of the file and the IP address of the
FTP or TFTP host as parameters. When you enter the command, the CLI prompts you for a
username and password.
Note:
In addition to using the CLI to upgrade software and firmware, you can use the
Note:
Avaya IW and the GIW. See
GIW
Use the copy ftp module command, followed by the module number of the module you
want to upgrade, to upgrade the firmware on a media module from an FTP server.
Use the copy ftp SW_imageA command to upgrade the G450 firmware into Bank A
from an FTP server.
Use the copy ftp SW_imageB command to upgrade the G450 firmware into Bank B
from an FTP server.
Use the copy ftp EW_archive command to upgrade the Java applet for Avaya G450
Manager software from an FTP server.
Use the copy tftp module command, followed by the module number of the module
you want to upgrade, to upgrade the firmware on a media module from a TFTP server.
Use the copy tftp SW_imageA command to upgrade the G450 firmware into Bank A
from a TFTP server.
Use the copy tftp SW_imageB command to upgrade the G450 firmware into Bank B
from a TFTP server.
Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G450
Manager software from a TFTP server.
When using FTP or TFTP commands, you must use the specific path of the file on the FTP or
TFTP server according to the home directory of the service (FTP or TFTP) that you are using.
For example, to upgrade the firmware of an MM710 media module in slot 2 from a TFTP server
with the IP address 192.1.1.10, where the home directory is c:\home\ftp\ and the upgrade
file is located in the directory c:\home\ftp\version, use the following command:
copy tftp module \version\mm710v3.fdl 192.1.1.10 2
100 Administration for the Avaya G450 Media Gateway
on page 51.
Accessing Avaya IW
on page 48 and
Accessing

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents