Firmware Upgrades From The Primary Controller; Upgrading Firmware Using The Cli Through Ftp/Tftp - Avaya G430 Installation And Upgrades

Branch
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Upgrading the Branch Gateway firmware
Related links
Branch Gateway firmware upgrades

Firmware upgrades from the primary controller

For a Branch Gateway without an S8300 or for a Branch Gateway with an S8300 installed as an
LSP, you can upgrade Branch Gateway firmware from the remotely located primary controller. The
primary controller may be an S8300, S85XX, S87XX, or S88XX server. See the guide for the
primary controller for information about upgrading firmware from the primary controller. See
Upgrading, Migrating, and Converting Avaya Servers and Gateways, 03-300412.
Note:
You can only upgrade using FTP on the S85XX, S87XX, and S88XX servers.
Related links
Branch Gateway firmware upgrades

Upgrading firmware using the CLI through FTP/TFTP

About this task
You can upgrade firmware through FTP/TFTP using the CLI. You can perform the upgrade remotely
using a modem connection, but the upgrade files must first be downloaded to an FTP or TFTP
server on the LAN connected to the Branch Gateway.
Procedure
1. Prepare installation worksheets.
See
Preparing installation worksheets
2. Set up an FTP or TFTP server on the LAN connected to the Branch Gateway.
For information about setting up a TFTP server, see
Note:
If you use an FTP server, the Branch Gateway prompts you for a username and
password when you enter a command to transfer a file. Also, when opening an FTP
connection to the S8300, all anonymous FTP file transfers are restricted to the /var/
home/ftp/pub directory. Permission for anonymous FTP users to create files in other
directories is denied. You must enable the S8300 FTP server from the Maintenance web
page. The S8300 FTP server disables itself after 15 minutes.
3. Download the firmware files to the FTP or TFTP server.
See
`zDownloading Branch Gateway firmware files to a local TFTP server
Installing firmware from the TFTP server on the S8300 Server
4. Connect to the Branch Gateway via modem or via the Services port on the front panel.
February 2017
on page 87
on page 87
on page 90.
Installation and Upgrades for the Avaya Branch Gateway G430
Comments on this document? infodev@avaya.com
Setting up a TFTP server
on page 91 or
on page 93.
on page 91.
88

Advertisement

Table of Contents
loading

Table of Contents