ADTRAN AOS Version R10.1.0 Command Reference Manual page 2302

Command Reference Guide
spanning-tree bpduguard
Use the spanning-tree bpduguard command to block bridge protocol data units (BPDUs) from being
received on this interface. To return to the default value, use the no form of this command. Variations of
this command include:
spanning-tree bpduguard disable
spanning-tree bpduguard enable
Syntax Description
disable
enable
Default Values
By default, this command is set to disable.
Command History
Release 5.1
Usage Examples
The following example enables the BPDU guard on the interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#spanning-tree bpduguard enable
60000CRG0-35E
Disables the BPDU block.
Enables the BPDU block.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Subinterface Command Set
2302