Mpls Ldp Graceful-Restart Timers Neighbor-Liveness - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 13: M Commands

mpls ldp graceful-restart timers neighbor-liveness

mpls ldp graceful-restart timers neighbor-liveness seconds
Syntax
no mpls ldp graceful-restart timers neighbor-liveness
Command introduced in JUNOSe Release 7.1.0.
Release Information
Specifies the maximum length of time that the router waits for its neighbor to
Description
reestablish an LDP session. The no version restores the default value, 120 seconds.
seconds Number of seconds in the range 5–300
Options
Global Configuration
Mode
1343
mpls ldp graceful-restart timers neighbor-liveness