Auth-Router-Name - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

auth-router-name

[ no ] auth-router-name [ routerName ]
Syntax
Command introduced in JUNOSe Release 9.0.0.
Release Information
Assigns an access virtual router. The no version restores the default router.
Description
NOTE: This command replaces the deprecated router-name command, which may
be removed completely in a future release.
Options
Domain Map Configuration
Mode
202
auth-router-name
routerName Name of the virtual router; string of 1–32 alphanumeric characters