Router-Name - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

router-name

router-name vrName
Syntax
no router-name [ vrName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Maps a virtual router to a user domain name. The no version deletes the router name
Description
parameter, and the router defaults to the default virtual router.
NOTE: This command is deprecated and might be removed completely in a future
release. The functionality provided by this command has been replaced by the
auth-router-name and ip-router-name commands.
Options
Domain Map Configuration, Tunnel Group Tunnel Configuration
Mode
406
router-name
vrName Name of the virtual router to map to the user domain name