Rename - Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Manual

Junos 10.3 Junos XML Management Protocol Guide

rename

Usage
Description
Usage Guidelines
Related Topics
198
<rpc>
<load-configuration>
<configuration>
<!-- opening tag for each parent of the object -->
<!-- if the object has one identifier -->
<object rename="rename" name="new-name">
<name>current-name</name>
</object>
<!-- if the object has two identifiers, both changing -->
<object rename="rename" identifier1="new-name" \
identifier2=new-name">
<identifier1>current-name</identifier1>
<identifier2>current-name</identifier2>
</object>
<!-- closing tag for each parent of the object -->
</configuration>
</load-configuration>
</rpc>
Change the name of one or more of a configuration object's identifiers. In the
Usage section, the identifier tag element is called
identifier.
The rename attribute can be combined with either the
See "Renaming a Configuration Object" on page 123.
active on page 183
inactive on page 186
<load-configuration> on page 168
<rpc> on page 176
when the element has one
<name>
inactive or active attribute.
Copyright © 2010, Juniper Networks, Inc.