Bgp Redistribute-Internal - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bgp redistribute-internal

Syntax
Release Information
Description
Mode
294
[ no ] bgp redistribute-internal
Command introduced before JunosE Release 7.1.0.
Authorizes redistribution of internal BGP routes (in addition to external BGP routes) into
protocols that have BGP route redistribution enabled. This command is not required for
IBGP routes within a VRF, for which redistribution is always enabled. The no version
restores the default, redistributing only external BGP routes.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.