Monitoring The Format Of The Remote-Circuit-Id For Radius; Monitoring The Delimiter Character In The Remote-Circuit-Id For Radius; Monitoring The Acct-Session-Id Radius Attribute - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
host1#show radius nas-identifier
fox
Related Topics

Monitoring the Format of the Remote-Circuit-ID for RADIUS

Display the format configured for the PPPoE remote circuit ID value captured from
Purpose
a DSLAM.
The default format is agent-circuit-ID. If the PPPoE remote circuit ID value is
configured to include any or all of the agent-circuit-id, agent-remote-id, and
nas-identifier components, the display lists the components included and the order
in which they appear.
If the PPPoE remote circuit ID value is configured to use the format for the
dsl-forum-1 keyword of "radius remote-circuit-id-format" on page 197 , the display
indicates that this format is in effect.
To display the format configured for the PPPoE remote circuit ID value captured
Action
from a DSLAM:
host1#show radius remote-circuit-id-format
nas-identifier agent-circuit-id agent-remote-id
Related Topics

Monitoring the Delimiter Character in the Remote-Circuit-ID for RADIUS

Display the delimiter character configured to set off components in the PPPoE remote
Purpose
circuit ID value captured from a DSLAM. The default delimiter character is #.
To display the delimiter character:
Action
host1#show radius remote-circuit-id-delimiter
!
Related Topics

Monitoring the Acct-Session-Id RADIUS Attribute

Display the format used for the Acct-Session-Id attribute.
Purpose
300
Monitoring the Format of the Remote-Circuit-ID for RADIUS
show radius nas-identifier
[32] NAS-Identifier on page 196
show radius remote-circuit-id-format
show radius remote-circuit-id-delimiter